Sauna Sanna 6.8+5.9 m²

Sauna Sanna 6.8+5.9 m² is a European flat-pack timber sauna with 6.8 m² of enclosed floor area. The external footprint measures 650 x 230 cm, with a wall height of 217 cm and a total height of 249 cm. Walls are 44 mm spruce, kiln-dried and machine-cut, and the timber is supplied untreated. The steam room has a window, two-level aspen benches with a back, an aspen heater safety railing, ceiling boards and ceiling insulation, and an inner door with 8 mm toughened glass. Outside there is a sitting bench under the roof overhang and a louvre panel. Our Sauna Sanna 6.8+5.9 m² is sized for a home sauna. It arrives as a complete flat-pack kit with fixings and illustrated assembly manuals.

Features

• 44 mm spruce walls, 217 cm wall height, 249 cm total height.
• 18.4 m² roof at 6.3°, with 19 mm roof boards and a 30 cm overhang.
• Window in the steam room, two-level aspen benches with a back, and an aspen heater safety railing.
• Steam room ceiling boards and ceiling insulation included.
• Summer grade door and window with 4-9-4 mm double toughened glass, and an 8 mm toughened glass sauna inner door.
• 28 mm floor boards and pressure-treated foundation joists.
• Sitting bench outside under the roof overhang, plus an external louvre panel.
• Can be built in mirror image to suit your site.

Optional Extras

• The heater is not included.
• Roof covering: four rolls of SBS roofing material (one roll = 10 m), or two rolls of EPDM roofing material (one roll = 1.5 x 10 m)
• Roofing felt underlayer: four rolls (one roll = 10 m)
• Roofing nails: one 1 kg box
• Foundation frame: one 3 x 3 m frame including LogFoot, one 4.5 x 3 m frame including LogFoot
• Rain gutter: one 3 m flat-roof gutter, one 4 m flat-roof gutter
• Sauna heater: Narvi NM 6 kW, Huum Drop 6 kW or Narvi NM 9 kW, each including stones

Start with the base. Choose a position that is level, firm and drains freely, and set out a foundation across the full 650 x 230 cm footprint with working room on every side. A concrete slab, piers or a compacted and levelled bearer arrangement with sufficient bearing capacity all work, provided the surface is flat and square before the first timber is placed. Check the building is set-out true to requirements and as per installation manual. The treated foundation joists sit on that base, so grade the ground to carry water away from the building and keep soil and mulch below the joist line. If in doubt, always consult a foundation specialist.

Keep the packs flat, dry and off the ground until you are ready to build. Where the timber is supplied untreated, have your exterior coating ready before you begin and apply at least two coats to all faces, including cut ends and anything that will be hard to reach once the building is assembled and standing. Re-apply coating as recommended by the manufacturer and before the finish starts to fail.

Assemble in the order shown in the provided manuals. Timber is a living material. It shrinks and expands based on temperature and humidity changes. This is normal, and it means periodical adjustments to doors and windows over the first few months and with the seasons thereafter.

Our products are under continuous development and improvement. Minor variations from the details shown can occur.

Assembly manuals

• Canopy roof 5.9 m² Sanna
• Sanna 6.8 m²

Delivery terms are shown on each product listing. Where a listing indicates depot delivery, delivery is free to our freight depots in the Adelaide, Brisbane, Canberra, Melbourne and Sydney metro areas, and quoted before purchase for destinations beyond those areas. Free warehouse pickup is available. Smaller items and accessories are sent by standard post or courier to your home address, with shipping shown at checkout.

Larger products are supplied as flat-pack kits on pallets. The number of pallets, their dimensions and their weights vary by product and are shown with each product.

You may collect your order from our warehouse or the depot, or arrange delivery from the depot to your final destination at your cost. Most depots offer delivery from the depot to your address. Unloading, access and any equipment required are organised by you with the depot or your chosen delivery provider.

Products held in stock are dispatched within 1 to 4 business days of receipt of payment. Made to order products carry a lead time of 8 to 14 weeks.

Our timber products are delivered as securely packaged, weatherproof flat packs. Construction materials, doors, windows, fixtures, hardware, and any optionally added products are included as detailed in the description. This ensures safe delivery and storage.

Return and Refund Policy · Shipping Policy